• SBBS 3.17 -> 3.18 (Dev)

    From Prince@prince@vert.synchro.net.remove-6zw-this to Digital Man on Mon Sep 14 04:23:28 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Hi DM.

    So, I started with my write up of "Synchronet Door Server" configuration; and ran into a roadblock.

    My install of SBBS 3.17b onto Win2k3 R2 went flawless. I'm able to configure, run, etc.

    My issues crop up after following the Development Update Instructions. I've downloaded and extracted the ZIPs, and ran JSExec Update. No errors.

    However, once I re-launch SBBS, I get errors stating that "node directory already exists", and the Control Panel crashes out.

    If I try to launch SCFG, I get an error stating the C:\SBBS\Ctrl\main.cnf is missing; however it is there.

    Verified %SBBSCTRL% variable set to C:\sbbs\ctrl, and as my domain admin account is a local administrator on this virtual machine, I've verified my permissions are intact and correct.

    Strangely, the update process worked flawlessly the other day when I attempted this, so not quite sure what was different.

    I'll keep plugging away at this, but thought I'd reach out just in case there may be something I'm missing.

    Thanks again!
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Prince@prince@vert.synchro.net.remove-o22-this to Digital Man on Mon Sep 14 04:43:07 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 04:23 am

    I'll keep plugging away at this, but thought I'd reach out just in case there may be something I'm missing.

    Thanks again!

    Doh! Too early, and apparently reading is not my forte this morning.

    Right at the top of the development page - it states the requirement for VC2015 redist. Missed this part.

    I shall carry on...
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Prince@prince@vert.synchro.net.remove-hvg-this to Digital Man on Mon Sep 14 05:03:19 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 04:43 am

    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 04:23 am

    I'll keep plugging away at this, but thought I'd reach out just in case there may be something I'm missing.

    Thanks again!

    Doh! Too early, and apparently reading is not my forte this morning.

    Right at the top of the development page - it states the requirement for VC2015 redist. Missed this part.

    I shall carry on...


    No dice after Dev upgrade to 3.18 :(


    !ERROR17 (File exists) creating directory C:\SBBS\NODE1\

    SCFG errors with

    Main configuration file C:\sbbs\ctrl\main.cnf missing!

    Yet, verified the file is in fact there.


    Thoughts?
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-y4u-this to Prince on Mon Sep 14 11:09:17 2020
    From Newsgroup: alt.bbs.synchronet

    To: Prince
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 05:03 am

    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 04:43 am

    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 04:23 am

    I'll keep plugging away at this, but thought I'd reach out just in case there may be something I'm missing.

    Thanks again!

    Doh! Too early, and apparently reading is not my forte this morning.

    Right at the top of the development page - it states the requirement for VC2015 redist. Missed this part.

    I shall carry on...


    No dice after Dev upgrade to 3.18 :(


    !ERROR17 (File exists) creating directory C:\SBBS\NODE1\

    SCFG errors with

    Main configuration file C:\sbbs\ctrl\main.cnf missing!

    Yet, verified the file is in fact there.


    Thoughts?

    None come to mind. I think you're the only one getting those "ERROR 17" errors, so is there something unique or different about your Windows system?

    digital man

    Synchronet "Real Fact" #18:
    Rob Swindell first learned to program in C by hacking on WWIV BBS software. Norco, CA WX: 79.7øF, 44.0% humidity, 3 mph E wind, 0.00 inches rain/24hrs
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Prince@prince@vert.synchro.net.remove-6qk-this to Digital Man on Mon Sep 14 11:24:43 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Digital Man to Prince on Mon Sep 14 2020 11:09 am

    No dice after Dev upgrade to 3.18 :(


    !ERROR17 (File exists) creating directory C:\SBBS\NODE1\

    SCFG errors with

    Main configuration file C:\sbbs\ctrl\main.cnf missing!

    Yet, verified the file is in fact there.


    Thoughts?

    None come to mind. I think you're the only one getting those "ERROR 17" errors, so is there something unique or different about your Windows system?

    digital man



    I don't think anything out of the ordinary.

    -Brand new VM deployed from Windows 2003 R2 ISOs (Disk1/Disk2).
    -Joined to my active directory domain (perhaps something here, will check). -VC++ 2008 Redist Installed.
    -VC++ 2010 Redist Installed.
    -VC++ 2015 Redist Installed.

    -SBBS 3.17b Installed. Works flawless.

    -Perform upgrade steps (extract ZIPs over EXEC and TEXT directories, replace TEXT.DAT in CTRL directory), run JSExec Update.

    -Launch SBBS - confirms 3.18, but get the errors and the telnet server fails to start. SCFG throws errors that the config file can't be found.

    I'll disjoin from the domain and try again; perhaps some old GPO setting is causing it to shit.

    More to come...
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Prince@prince@vert.synchro.net.remove-1e8-this to Digital Man on Mon Sep 14 11:49:01 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 11:24 am

    I'll disjoin from the domain and try again; perhaps some old GPO setting is causing it to shit.

    More to come...

    Same thing, unfortunately.

    error.log contains:

    term !ERROR 17 (File Exists) creating directory C:\sbbs\NODE1\


    More to come...
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Prince@prince@vert.synchro.net.remove-ry6-this to Digital Man on Mon Sep 14 13:28:03 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 11:49 am

    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 11:24 am

    I'll disjoin from the domain and try again; perhaps some old GPO setting is causing it to shit.

    More to come...

    Same thing, unfortunately.

    error.log contains:

    term !ERROR 17 (File Exists) creating directory C:\sbbs\NODE1\


    More to come...


    Not sure if this helps; Windows application log reports these two errors:

    Reporting queued error: faulting application sbbsctrl.exe, version 3.17.1.0, faulting module sbbs.dll, version 0.0.0.0, fault address 0x00102a79

    8 seconds later:

    Reporting queued error: faulting application sbbsctrl.exe, version 3.17.1.0, faulting module sbbs.dll, version 0.0.0.0, fault address 0x001050c0

    The fault addresses are consistent in each round of errors.
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-wh4-this to Prince on Mon Sep 14 18:37:03 2020
    From Newsgroup: alt.bbs.synchronet

    To: Prince
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 11:49 am

    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 11:24 am

    I'll disjoin from the domain and try again; perhaps some old GPO setting is causing it to shit.

    More to come...

    Same thing, unfortunately.

    error.log contains:

    term !ERROR 17 (File Exists) creating directory C:\sbbs\NODE1\


    More to come...

    So now that I know you're running W2k3, I was able reproduce the problem on Windows XP and it's a known Microsoft bug:
    https://stackoverflow.com/questions/32452777/visual-c-2015-express-stat-not-working-on-windows-xp

    I install some vc-redist packages on XP system but nothing has fixed the problem yet.

    digital man

    Rush quote #30:
    You can do a lot in a lifetime if you don't burn out too fast
    Norco, CA WX: 85.1øF, 34.0% humidity, 7 mph SE wind, 0.00 inches rain/24hrs
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-4da-this to Prince on Mon Sep 14 18:38:51 2020
    From Newsgroup: alt.bbs.synchronet

    To: Prince
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Mon Sep 14 2020 01:28 pm

    Not sure if this helps; Windows application log reports these two errors:

    Reporting queued error: faulting application sbbsctrl.exe, version 3.17.1.0, faulting module sbbs.dll, version 0.0.0.0, fault address 0x00102a79

    8 seconds later:

    Reporting queued error: faulting application sbbsctrl.exe, version 3.17.1.0, faulting module sbbs.dll, version 0.0.0.0, fault address 0x001050c0

    The fault addresses are consistent in each round of errors.

    It's odd that the version reported there is 3.17, yet, you said v3.17 was working fine.

    digital man

    This Is Spinal Tap quote #33:
    Nigel Tufnel: Well, so what? What's wrong with bein' sexy?
    Norco, CA WX: 85.1øF, 34.0% humidity, 7 mph SE wind, 0.00 inches rain/24hrs
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Prince@prince@vert.synchro.net.remove-ihu-this to Digital Man on Tue Sep 15 03:00:28 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Digital Man to Prince on Mon Sep 14 2020 06:38 pm

    Reporting queued error: faulting application sbbsctrl.exe, version 3.17.1.0, faulting module sbbs.dll, version 0.0.0.0, fault address 0x001050c0

    The fault addresses are consistent in each round of errors.

    It's odd that the version reported there is 3.17, yet, you said v3.17 was working fine.

    digital man


    Good Morning DM.

    I've dug into this a bit further, and found that the entries in the application log do in fact refer to SBBS 3.17b out of the box on 2k3/XP. When the Control Panel first loads, terminal server has "difficulty" binding to '0.0.0.0,::' and the control panel will crash. Some mad clicking and typing skills to quickly change the bindings to the IP address of the virtual machine stop this behavior, and all is fine. When those crashes occur, the application log contains those entries - which is why it mentions 3.17.1.0.

    I've installed the latest VC++ 2015 Update 3 in the hopes of fixing it, but the behavior persists. (The initial 3.17b crashing until binding updates, as well as the !ERROR17 (File Exists) after performing the update to 3.18.

    My apologies if I jumped the gun and lead you down the wrong road on the 3.17.1.0/application log bit; although it still seems like something worth debugging?

    I'm digging deeper over here as well.
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-qkg-this to Prince on Tue Sep 15 10:16:05 2020
    From Newsgroup: alt.bbs.synchronet

    To: Prince
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Tue Sep 15 2020 03:00 am

    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Digital Man to Prince on Mon Sep 14 2020 06:38 pm

    Reporting queued error: faulting application sbbsctrl.exe, version 3.17.1.0, faulting module sbbs.dll, version 0.0.0.0, fault address 0x001050c0

    The fault addresses are consistent in each round of errors.

    It's odd that the version reported there is 3.17, yet, you said v3.17 was working fine.

    digital man


    Good Morning DM.

    I've dug into this a bit further, and found that the entries in the application log do in fact refer to SBBS 3.17b out of the box on 2k3/XP. When the Control Panel first loads, terminal server has "difficulty" binding to '0.0.0.0,::' and the control panel will crash. Some mad clicking and typing skills to quickly change the bindings to the IP address of the virtual machine stop this behavior, and all is fine. When those crashes occur, the application log contains those entries - which is why it mentions 3.17.1.0.

    I've installed the latest VC++ 2015 Update 3 in the hopes of fixing it, but the behavior persists. (The initial 3.17b crashing until binding updates, as well as the !ERROR17 (File Exists) after performing the update to 3.18.

    My apologies if I jumped the gun and lead you down the wrong road on the 3.17.1.0/application log bit; although it still seems like something worth debugging?

    I'm digging deeper over here as well.

    All of those issues should be addressed in today's dev-build. Give it a try.

    digital man

    This Is Spinal Tap quote #43:
    I feel my role in the band is ... kind of like lukewarm water.
    Norco, CA WX: 82.5øF, 41.0% humidity, 0 mph WSW wind, 0.00 inches rain/24hrs --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Prince@prince@vert.synchro.net.remove-qjg-this to Digital Man on Wed Sep 16 02:20:59 2020
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Digital Man to Prince on Tue Sep 15 2020 10:16 am


    All of those issues should be addressed in today's dev-build. Give it a try.

    digital man

    BRAVO!!! 3.18RevB running on W2k3 (XP) successfully!

    Thanks DM!
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-iiq-this to Prince on Wed Sep 16 13:18:12 2020
    From Newsgroup: alt.bbs.synchronet

    To: Prince
    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Prince to Digital Man on Wed Sep 16 2020 02:20 am

    Re: SBBS 3.17 -> 3.18 (Dev)
    By: Digital Man to Prince on Tue Sep 15 2020 10:16 am


    All of those issues should be addressed in today's dev-build. Give it a try.

    BRAVO!!! 3.18RevB running on W2k3 (XP) successfully!

    Thank you for the confirmation!

    digital man

    This Is Spinal Tap quote #25:
    Viv Savage: Have... a good... time... all the time. That's my philosophy. Norco, CA WX: 94.4øF, 18.0% humidity, 5 mph E wind, 0.00 inches rain/24hrs
    --- Synchronet 3.18b-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113