• Host-routed netmail to points

    From poindexter FORTRAN@poindexter.fortran@REALITY.remove-1gx-this to All on Wed May 25 09:35:29 2022
    From Newsgroup: alt.bbs.synchronet

    Subject: Host-routed netmail to points
    @MSGID: <628E5AD1.64191.dove.sync@realitycheckbbs.org>
    @TZ: c1e0

    Hi, DM et. al,

    I have a question about host-routed netmail to points. I've been banging my head on this for some time and am running into issues.

    I'm an RC in fidonet and route netmail for my region. netmail from downlinks passes through OK to destination nodes, but if a downlink sends mail for a point, it appears to sit on my system and is not routed to the bossnode. I found a couple errors in my log where SBBS was trying to send to the point and failing.

    How can I set sbbsecho to crashmail the boss node when point mail arrives?

    --k

    ---
    þ Synchronet þ .: realitycheckbbs.org :: scientia potentia est :.
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-zba-this to poindexter FORTRAN on Wed May 25 10:12:43 2022
    From Newsgroup: alt.bbs.synchronet

    To: poindexter FORTRAN
    Re: Host-routed netmail to points
    By: poindexter FORTRAN to All on Wed May 25 2022 09:35 am

    Subject: Host-routed netmail to points
    @MSGID: <628E5AD1.64191.dove.sync@realitycheckbbs.org>
    @TZ: c1e0

    Hi, DM et. al,

    I have a question about host-routed netmail to points. I've been banging my head on this for some time and am running into issues.

    I'm an RC in fidonet and route netmail for my region. netmail from downlinks passes through OK to destination nodes, but if a downlink sends mail for a point, it appears to sit on my system and is not routed to the bossnode. I found a couple errors in my log where SBBS was trying to send to the point and failing.

    How can I set sbbsecho to crashmail the boss node when point mail arrives?

    Here's that routing logic in sbbsecho.c:

    if(nodecfg == NULL && dest.point != 0) {
    fidoaddr_t boss = dest;
    boss.point = 0;
    if((nodecfg = findnodecfg(&cfg, boss, /* exact: */true)) != NULL) {
    dest = boss;
    lprintf(LOG_INFO, "Routing packet (%s) to boss-node %s", tmp_pkt, smb_faddrtoa(&dest, NULL));
    }
    }


    So it looks like the destination point node must not be configured in sbbsecho.ini while the boss node must be configured in sbbsecho.ini for this routing to occur.
    --
    digital man (rob)

    Synchronet/BBS Terminology Definition #70:
    SIGHUP = Hangup signal sent to a process when its controlling terminal is closed
    Norco, CA WX: 73.1øF, 62.0% humidity, 5 mph ESE wind, 0.00 inches rain/24hrs --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Kurt Weiske@kurt.weiske@1:218/700.remove-wne-this to Digital Man on Wed May 25 13:39:20 2022
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Re: Host-routed netmail to points
    By: Digital Man to poindexter FORTRAN on Wed May 25 2022 10:12 am

    So it looks like the destination point node must not be configured in sbbsecho.ini while the boss node must be configured in sbbsecho.ini for thi

    Would setting a rule for 1:ALL setting the status to CRASH meet that criteria? What I'd like to do is go ahead and crash anyone directly, and as expected, crashmail point netmail to the bossnode.
    --- SBBSecho 3.15-Win32
    * Origin: http://realitycheckbbs.org | tomorrow's retro tech (1:218/700)
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-1m2-this to Kurt Weiske on Wed May 25 14:16:49 2022
    From Newsgroup: alt.bbs.synchronet

    To: Kurt Weiske
    Re: Host-routed netmail to points
    By: Kurt Weiske to Digital Man on Wed May 25 2022 01:39 pm

    Re: Host-routed netmail to points
    By: Digital Man to poindexter FORTRAN on Wed May 25 2022 10:12 am

    So it looks like the destination point node must not be configured in sbbsecho.ini while the boss node must be configured in sbbsecho.ini for thi

    Would setting a rule for 1:ALL setting the status to CRASH meet that criteria?

    I don't think so: "the boss node must be configured in sbbsecho.ini".

    What I'd like to do is go ahead and crash anyone directly, and as
    expected, crashmail point netmail to the bossnode.

    The logic in SBBSecho is currently that the bossnode must be configured. Perhaps that could be changed to just strip the point number always and call that a "route", but nobody has ever asked for that behavior. Is that what you're asking for?
    --
    digital man (rob)

    This Is Spinal Tap quote #6:
    David St. Hubbins: He was the patron saint of quality footwear.
    Norco, CA WX: 79.0øF, 52.0% humidity, 10 mph S wind, 0.00 inches rain/24hrs
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From poindexter FORTRAN@poindexter.fortran@REALITY.remove-hlr-this to Digital Man on Wed May 25 23:01:17 2022
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Subject: Host-routed netmail to points
    @MSGID: <628F17AD.64200.dove.sync@realitycheckbbs.org>
    @REPLY: <628E9CC1.47335.sync@vert.synchro.net>
    @TZ: c1e0
    Re: Host-routed netmail to points
    By: Digital Man to Kurt Weiske on Wed May 25 2022 02:16 pm

    The logic in SBBSecho is currently that the bossnode must be configured. Perhaps that could be changed to just strip the point number always and
    calI

    I have 1:229/426 configured in sbbsecho and tried sending mail to a point off of Nick's system. I saw this in my log:

    5/25 10:45:07p BINKOUT Connecting to 1:229/426.3@fidonet at p3.f426.n229.z1.binkd.net:24554
    5/25 10:45:07p BINKOUT Connection to p3.f426.n229.z1.binkd.net:24554 failed (Error: No such host is known. ).

    So, it looks like sbbsecho is treating a 4d address literally and trying to send directly to a point.

    What I think it should be doing is evaluating the zone:net/node portion of pointmail and sending the mail according to the boss node's configuration or a wildcard configuration that applies.

    ---
    þ Synchronet þ .: realitycheckbbs.org :: scientia potentia est :.
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Wilfred van Velzen@wilfred.van.velzen@2:280/464.remove-g90-this to poindexter FORTRAN on Thu May 26 12:29:53 2022
    From Newsgroup: alt.bbs.synchronet

    To: poindexter FORTRAN
    Hi poindexter,

    On 2022-05-25 23:01:17, you wrote to Digital Man:

    The logic in SBBSecho is currently that the bossnode must be
    configured. Perhaps that could be changed to just strip the point
    number always and
    calI

    I have 1:229/426 configured in sbbsecho and tried sending mail to a point off of Nick's system. I saw this in my log:

    5/25 10:45:07p BINKOUT Connecting to 1:229/426.3@fidonet at p3.f426.n229.z1.binkd.net:24554 5/25 10:45:07p BINKOUT Connection to p3.f426.n229.z1.binkd.net:24554 failed (Error: No such host is known. ).

    So, it looks like sbbsecho is treating a 4d address literally and trying to
    send directly to a point.

    Sometimes that works! For instance I have 2 points which are directly connectable because they have a binkp service running 24/7. And at what address they are connectable is also public information because it's published in the Z2PNT list.

    So if DM is going to change anything in the routing logic, I think that possible situation should also be taken into account...


    Bye, Wilfred.

    --- FMail-lnx64 2.1.0.18-B20170815
    * Origin: FMail development HQ (2:280/464)
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-n55-this to poindexter FORTRAN on Thu May 26 08:45:17 2022
    From Newsgroup: alt.bbs.synchronet

    To: poindexter FORTRAN
    Re: Host-routed netmail to points
    By: poindexter FORTRAN to Digital Man on Wed May 25 2022 11:01 pm

    Subject: Host-routed netmail to points
    @MSGID: <628F17AD.64200.dove.sync@realitycheckbbs.org>
    @REPLY: <628E9CC1.47335.sync@vert.synchro.net>
    @TZ: c1e0
    Re: Host-routed netmail to points
    By: Digital Man to Kurt Weiske on Wed May 25 2022 02:16 pm

    The logic in SBBSecho is currently that the bossnode must be configured. Perhaps that could be changed to just strip the point number always and
    calI

    I have 1:229/426 configured in sbbsecho and tried sending mail to a point off of Nick's system. I saw this in my log:

    5/25 10:45:07p BINKOUT Connecting to 1:229/426.3@fidonet at p3.f426.n229.z1.binkd.net:24554
    5/25 10:45:07p BINKOUT Connection to p3.f426.n229.z1.binkd.net:24554 failed (Error: No such host is known. ).

    So, it looks like sbbsecho is treating a 4d address literally and trying to send directly to a point.

    What I think it should be doing is evaluating the zone:net/node portion of pointmail and sending the mail according to the boss node's configuration or a wildcard configuration that applies.

    According to the logic I pasted here and explained:

    If 1:229/426 is configured in sbbsecho.ini and 1:229/426.3 is *not* configured in sbbsecho.ini, then you should see in your sbbsecho.log file a line similar to this one, when processing a packet for 1:229/426.3:

    Routing packet (x) to boss-node 1:229/426
    --
    digital man (rob)

    Sling Blade quote #16:
    Karl Childers (to Doyle, re: lawn mower blade): I aim to kill you with it. Mmm. Norco, CA WX: 60.7øF, 92.0% humidity, 2 mph SE wind, 0.00 inches rain/24hrs
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Kurt Weiske@kurt.weiske@1:218/700.remove-mtp-this to Wilfred van Velzen on Thu May 26 09:17:00 2022
    From Newsgroup: alt.bbs.synchronet

    To: Wilfred van Velzen
    Wilfred van Velzen wrote to poindexter FORTRAN <=-

    Sometimes that works! For instance I have 2 points which are directly connectable because they have a binkp service running 24/7. And at what address they are connectable is also public information because it's published in the Z2PNT list.

    I've never been sure of the reasoning behind a public point list; my
    understanding is that the boss node just needs to know about its
    points, and all routing can be done to the boss - and the idea behind
    a point was to support a system that was inaccessible at other times
    and couldn't keep up with the minimum of being CM or available during
    ZMH?

    Otherwise, why not just put the node in the nodelist?

    So, the expected behavior should be, if a point configuration is
    defined in sbbsecho and the point address is known, route directly.

    If the boss has a configuration and the point doesn't, route to the
    boss.

    If there's no boss or point configuration, route to the boss according to
    default rules.

    What appears to be happening is that sbbsecho is trying to route
    directly to the point by default.






    ... Discover your formulas and abandon them
    --- MultiMail/DOS v0.52
    * Origin: http://realitycheckbbs.org | tomorrow's retro tech (1:218/700)
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From poindexter FORTRAN@poindexter.fortran@REALITY.remove-o8y-this to Digital Man on Thu May 26 13:50:06 2022
    From Newsgroup: alt.bbs.synchronet

    To: Digital Man
    Subject: Host-routed netmail to points
    @MSGID: <628FE7FE.64204.dove.sync@realitycheckbbs.org>
    @REPLY: <628FA08D.47339.sync@vert.synchro.net>
    @TZ: c1e0
    Re: Host-routed netmail to points
    By: Digital Man to poindexter FORTRAN on Thu May 26 2022 08:45 am

    If 1:229/426 is configured in sbbsecho.ini and 1:229/426.3 is *not* configured in sbbsecho.ini, then you should see in your sbbsecho.log file a line similar to this one, when processing a packet for 1:229/426.3:

    Routing packet (x) to boss-node 1:229/426

    Therein lies the problem. 229/426 is defined -- Nick is my uplink. .3 is not defined. What I'm seeing is below.

    5/25 10:45:07p BINKOUT Connecting to 1:229/426.3@fidonet at
    p3.f426.n229.z1.binkd.net:24554
    5/25 10:45:07p BINKOUT Connection to p3.f426.n229.z1.binkd.net:24554
    failed (Error: No such host is known. ).

    ---
    þ Synchronet þ .: realitycheckbbs.org :: scientia potentia est :.
    --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Digital Man@digital.man@vert.synchro.net.remove-4sd-this to poindexter FORTRAN on Thu May 26 16:07:42 2022
    From Newsgroup: alt.bbs.synchronet

    To: poindexter FORTRAN
    Re: Host-routed netmail to points
    By: poindexter FORTRAN to Digital Man on Thu May 26 2022 01:50 pm

    Subject: Host-routed netmail to points
    @MSGID: <628FE7FE.64204.dove.sync@realitycheckbbs.org>
    @REPLY: <628FA08D.47339.sync@vert.synchro.net>
    @TZ: c1e0
    Re: Host-routed netmail to points
    By: Digital Man to poindexter FORTRAN on Thu May 26 2022 08:45 am

    If 1:229/426 is configured in sbbsecho.ini and 1:229/426.3 is *not* configured in sbbsecho.ini, then you should see in your sbbsecho.log file a line similar to this one, when processing a packet for 1:229/426.3:

    Routing packet (x) to boss-node 1:229/426

    Therein lies the problem. 229/426 is defined -- Nick is my uplink. .3 is not defined. What I'm seeing is below.

    5/25 10:45:07p BINKOUT Connecting to 1:229/426.3@fidonet at
    p3.f426.n229.z1.binkd.net:24554
    5/25 10:45:07p BINKOUT Connection to p3.f426.n229.z1.binkd.net:24554
    failed (Error: No such host is known. ).

    The sbbsecho.log file is the relevant log to be looking at in this case.
    --
    digital man (rob)

    Breaking Bad quote #25:
    Now if I could only learn how to lick myself. - Hank Schrader
    Norco, CA WX: 74.9øF, 57.0% humidity, 11 mph SW wind, 0.00 inches rain/24hrs --- Synchronet 3.19c-Linux NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --- Synchronet 3.19c-Linux NewsLink 1.113