• Cassette audio cleanup

    From Nightfox@VERT/DIGDIST to All on Wed Nov 11 21:22:03 2015
    Does anyone know any tricks for cleaning up music recorded onto a PC from a cassette tape? I have some music I recorded onto my PC from a cassette tape and was able to reduce much of the hiss (using Audacity) and applied an equalizer (using GoldWave), and overall I like the results. However, there are a couple things I'd still like to improve - Specifically, there's one track where the right channel drops out for a moment and comes back. There's also an occasional popping sound here and there. I'm not sure of the best way to clean up those spots.

    For the track where the right channel drops out for a moment and comes back, I've tried doing a channel mix (using GoldWave), but that changes the quality of the sound a bit - It doesn't sound as full as before. As far as removing the popping sounds, I'm not sure of the best way to do that either.

    Nightfox

    ---
    þ Synchronet þ Digital Distortion: digitaldistortionbbs.com
  • From Digital Man@VERT to Nightfox on Wed Nov 11 23:03:09 2015
    Re: Cassette audio cleanup
    By: Nightfox to All on Wed Nov 11 2015 09:22 pm

    Does anyone know any tricks for cleaning up music recorded onto a PC from a cassette tape? I have some music I recorded onto my PC from a cassette tape and was able to reduce much of the hiss (using Audacity) and applied an equalizer (using GoldWave), and overall I like the results. However, there are a couple things I'd still like to improve - Specifically, there's one track where the right channel drops out for a moment and comes back.
    There's also an occasional popping sound here and there. I'm not sure of the best way to clean up those spots.

    For the track where the right channel drops out for a moment and comes back, I've tried doing a channel mix (using GoldWave), but that changes the quality of the sound a bit - It doesn't sound as full as before. As far as removing the popping sounds, I'm not sure of the best way to do that either.

    If there aren't too many pops, you can actually select the click in Audacity and use the "Repair" effect in Audacity. I think it's mainly intended for digital distortion, but I've used it to repair analog clicks and pops successfully too. The trick is you have to really zoom way in one the wave form and choose just the pop/clip portion to repair. If you select too wide of a portion of the audio (more 128 samples), the effect won't do anything but display an error to you.

    With regard to drop-outs, you could probably use the opposite channel audio to possible fill in the missing "level" in the affect channel, but it'll still probably sound a little odd (especially with headphones).

    Pro-Audio might be the better message area to talk about this subject, but it does interest me.

    digital man

    Synchronet "Real Fact" #73:
    Vertrauen went online (as a WWIV BBS running on a 10MHz PC-XT clone) in 1988. Norco, CA WX: 59.7øF, 18.0% humidity, 9 mph WNW wind, 0.00 inches rain/24hrs

    ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net
  • From Nightfox@VERT/DIGDIST to Digital Man on Thu Nov 12 07:45:37 2015
    Re: Cassette audio cleanup
    By: Digital Man to Nightfox on Wed Nov 11 2015 23:03:09

    If there aren't too many pops, you can actually select the click in Audacity and use the "Repair" effect in Audacity. I think it's mainly intended for digital distortion, but I've used it to repair analog clicks and pops successfully too. The trick is you have to really zoom way in one the wave form and choose just the pop/clip portion to repair. If you select too wide of a portion of the audio (more 128 samples), the effect won't do anything but display an error to you.

    With regard to drop-outs, you could probably use the opposite channel audio to possible fill in the missing "level" in the affect channel, but it'll still probably sound a little odd (especially with headphones).

    Thanks for the reply and tips. I'll give Audacity's "Repair" effect a try. I'll have to tinker with ways to fill in the drop-outs.

    Pro-Audio might be the better message area to talk about this subject, but it does interest me.

    Ah, I suppose that makes sense. I was looking through the sub-boards to decide where to post this, and my eyes must have missed pro-audio. I was thinking there was a music-related sub-board on dove-net but didn't remember which one it was.

    Nightfox

    ---
    þ Synchronet þ Digital Distortion: digitaldistortionbbs.com
  • From Mro@VERT/BBSESINF to Nightfox on Sat Nov 14 08:35:07 2015
    Re: Cassette audio cleanup
    By: Nightfox to All on Wed Nov 11 2015 09:22 pm

    cassette tape? I have some music I recorded onto my PC from a cassette
    tape and was able to reduce much of the hiss (using Audacity) and applied
    an equalizer (using GoldWave), and overall I like the results. However, there are a couple things I'd still like to improve - Specifically, there's one track where the right channel drops out for a moment and comes back. There's also an occasional popping sound here and there. I'm not sure of the best way to clean up those spots.

    For the track where the right channel drops out for a moment and comes
    back, I've tried doing a channel mix (using GoldWave), but that changes the quality of the sound a bit - It doesn't sound as full as before. As far as removing the popping sounds, I'm not sure of the best way to do that

    you will not be able to work miracles and you will lose quality and/or distort the sound.
    pops are easy to take out. you manually select and delete them.

    ---
    þ Synchronet þ ::: BBSES.info - free BBS services :::
  • From Nightfox@VERT/DIGDIST to Digital Man on Sun Nov 15 17:43:57 2015
    Re: Cassette audio cleanup
    By: Digital Man to Nightfox on Wed Nov 11 2015 23:03:09

    If there aren't too many pops, you can actually select the click in Audacity and use the "Repair" effect in Audacity. I think it's mainly intended for digital distortion, but I've used it to repair analog clicks and pops successfully too.

    I suppose that fits with my BBS name. Hopefully my BBS will rarely be in need of repair though. ;)

    The trick is you have to really zoom way in one
    the wave form and choose just the pop/clip portion to repair. If you select too wide of a portion of the audio (more 128 samples), the effect won't do anything but display an error to you.

    I gave that a try, and I think it worked fairly well. It didn't totally remove the pops & clicks, but it did significantly lessen them so they aren't nearly as annoying as before. I wonder why it only lets you repair up to 128 samples though.. I ended up selecting several sections in a row of 128(ish) samples to repair - It seems like it should be able to let you make a wider selection if you want.

    Nightfox

    ---
    þ Synchronet þ Digital Distortion: digitaldistortionbbs.com
  • From Gumbro@VERT/NOSTROMO to Nightfox on Sat Nov 21 17:40:00 2015
    Re: Cassette audio cleanup
    By: Nightfox to All on Wed Nov 11 2015 21:22:00

    Does anyone know any tricks for cleaning up music recorded onto a PC from a cassette tape? I have some music I recorded onto my PC from a cassette tape

    I fix pops manually. Find the pop location and zoom in. You should find a dicontinuity in the wave that causes the pop, you just need to move the dots on the wave a bit to make it go away. Just make it more sine-curve like.

    For the lost stereo track, cannot help there, the only thing to do would be to copy the other track, say left, on top of the right, muted track.

    These days, I'm going to the other direction. I copy music from PC to cassettes and listen to them using my Aiwa (a walkman like). And of course buy old cassettes from thrift stores.
    ---[ Gumbro ]---

    ---
    þ Synchronet þ Nostromo - 192.168.0.2
  • From Nightfox@VERT/DIGDIST to Gumbro on Sat Nov 21 17:22:59 2015
    Re: Cassette audio cleanup
    By: Gumbro to Nightfox on Sat Nov 21 2015 17:40:00

    Does anyone know any tricks for cleaning up music recorded onto a PC
    from a cassette tape? I have some music I recorded onto my PC from a
    cassette tape

    I fix pops manually. Find the pop location and zoom in. You should find a dicontinuity in the wave that causes the pop, you just need to move the dots on the wave a bit to make it go away. Just make it more sine-curve like.

    Interesting, I hadn't thought about that. I'm not sure if the audio editors I typically use (GoldWave and Audacity) allow that, but they probably do.

    For the lost stereo track, cannot help there, the only thing to do would be to copy the other track, say left, on top of the right, muted track.

    I ended up doing that, and I suppose the result came out okay. It sounds somewhat different in that part, but less annoying than having one of the channels go out temporarily.

    These days, I'm going to the other direction. I copy music from PC to cassettes and listen to them using my Aiwa (a walkman like). And of course buy old cassettes from thrift stores.

    It has been many years since I had a cassette walkman. I don't even have any type of cassette player anymore.. I had recorded this cassette to my PC several years ago when I borrowed someone else's cassette stereo.

    Nightfox

    ---
    þ Synchronet þ Digital Distortion: digitaldistortionbbs.com
  • From Poindexter Fortran@VERT/REALITY to Nightfox on Sat Nov 21 21:52:28 2015
    Re: Cassette audio cleanup
    By: Nightfox to Gumbro on Sat Nov 21 2015 05:22 pm

    These days, I'm going to the other direction. I copy music from PC
    to cassettes and listen to them using my Aiwa (a walkman like). And
    of course buy old cassettes from thrift stores.

    I had a convertible in college with a theft-proof 8-track tape player. Had a great time picking up oldies on 8-Track at the thrift stores!

    ---
    þ Synchronet þ realitycheckBBS -- http://realitycheckBBS.org
  • From Nightfox@VERT/DIGDIST to Poindexter Fortran on Sun Nov 22 12:02:14 2015
    Re: Cassette audio cleanup
    By: Poindexter Fortran to Nightfox on Sat Nov 21 2015 21:52:28

    These days, I'm going to the other direction. I copy music from PC
    to cassettes and listen to them using my Aiwa (a walkman like). And
    of course buy old cassettes from thrift stores.

    I had a convertible in college with a theft-proof 8-track tape player. Had a great time picking up oldies on 8-Track at the thrift stores!

    Gumbro was the one who wrote that paragraph, so I'm wondering why you wrote your reply to me? Better to direct your reply to the person you're quoting..

    Nightfox

    ---
    þ Synchronet þ Digital Distortion: digitaldistortionbbs.com
  • From Digital Man@VERT to Poindexter Fortran on Sun Nov 22 14:51:51 2015
    Re: Cassette audio cleanup
    By: Poindexter Fortran to Nightfox on Sat Nov 21 2015 09:52 pm

    I had a convertible in college with a theft-proof 8-track tape player. Had a great time picking up oldies on 8-Track at the thrift stores!

    So it was theft-proof just by its nature of being an 8-track? :-)

    digital man

    Synchronet "Real Fact" #41:
    Rob Swindell was laughed out of a FidoNet Net103 (OC, Calif.) meeting in 1992. Norco, CA WX: 82.2øF, 10.0% humidity, 9 mph SW wind, 0.00 inches rain/24hrs

    ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net
  • From Gumbro@VERT/NOSTROMO to Nightfox on Tue Nov 24 19:53:00 2015
    Re: Cassette audio cleanup
    By: Nightfox to Gumbro on Sat Nov 21 2015 17:22:00

    Interesting, I hadn't thought about that. I'm not sure if the audio editors typically use (GoldWave and Audacity) allow that, but they probably do.

    Audacity allows for that. I learned this when making loops, that is, snippets of sounds that repeat seamlessly. Once you get the hang of it, you can construct all kinds of sounds from the scratch, or modify existing ones.

    ---[ Gumbro ]---

    ---
    þ Synchronet þ Nostromo - 192.168.0.2