(CONTINUED FROM PREVIOUS MESSAGE)

The use of these special ID's follow your callsign on the new bands
for which your CSCE shows that you've upgraded to. If you previously
had privileges on a certain band without the CSCE (for instance, you
upgraded from Technician to General), you're not required to use the
ID on frequencies above 50 Megahertz. However, using the Technician to
General upgrade example, if you want to use the frequencies for the
General Class licensee, you are REQUIRED to use the new identifier.

If you upgrade to the Extra Class license BEFORE your General Class
paper license copy is in hand, or in the FCC database, you keep your
Technician Class license, and the CSCE's for the General and Extra
Class upgrade, as proof of your upgrades. Again, using the upgrade to
Extra Class as an example, you use the special identifier for it,
instead of the General Class license identifier.

Once your new license grant appears in the FCC ULS database, or on
the QRZ or Hamdata websites noted above), you're no longer required to
use the special identifier. This usually takes 1 to 2 weeks after the
day you passed the exam. Failure to use the identifier before your
license upgrade appears in the FCC database would make it appear that
you are operating on amateur radio bands outside your privileges, and
you could get a Notice Of Violation from the FCC if that occurs.

License Terms
=============

Ham Radio licenses are good for ten (10) years, and they may be renewed ninety (90) days prior to expiration...NO SOONER. However, if you have a
change of address due to a move, you may MODIFY your license in that
regard AT ANY TIME. If the FCC is unable to deliver mail to you, your
ham radio license, and operating privileges can be suspended and/or
revoked until your address is corrected. Operation without a license
can result in a stiff monetary forfeiture (a fine) and imprisonment,
plus confiscation of your ham radio equipment...fines range from $7500
to $10,000, if not more.

If your ham radio license expires, but you have PROOF that you DID
APPLY for renewal no sooner than 90 days BEFORE expiration...even
though you may not have received the new license via the FCC ULS
(paper licenses are no longer mailed out, unless specifically
requested via the FCC ULS, as noted above), you may continue operating.

However, if this is not the case, you may NOT operate on an EXPIRED
ham radio license. But, you have a two (2) year "grace period" if your
ham radio license has expired, to reinstate your license. This "holds"
your license class privileges and callsign, until your license is renewed.

But, if you do not renew your license before it expires, and do nothing during the 2 year grace period, both your license and callsign will be FORFEITED. At that point, you have NO AUTHORITY to operate on the ham
radio bands, and it'll be as if you had NEVER taken a test!!

To get back on the air with the previous license class that you held,
you MUST take, AT MINIMUM, the Technician Class license, in order to get
back into amateur radio.

However, once an expired ham radio callsign passes the 2 year grace
period, anyone can apply for it under the Vanity Callsign system. So,
if you LOSE your current callsign, there is a chance that you may NOT
get it back!!

Also, if you upgrade your license to General or Amateur Extra, only the license class will change...the license expiration date will remain the
same. Only new licensees, or those receiving a Vanity Callsign, get a
fresh 10 year term...whether Technician, General, or Amateur Extra. I've
known hams who walked into a test session without a license, and walked
out with an Amateur Extra Class license...while not easy to do, it can be
done.

Sequential Versus Vanity Callsigns
==================================

Callsigns are normally issued in a sequential callsign system by
the FCC, for each license class. Once issued a callsign, you can
choose to keep it...or apply for a vanity callsign, after paying the appropriate fee, and submitting the required forms.

NOTE: The FCC issued a Report an Order on May 21, 2015, eliminating
the Vanity Callsign fee, and that change took effect on Sept. 3, 2015.
Those who had previously paid a fee for their Vanity Callsign(s) are NOT eligible for a refund.

When applying for a vanity callsign, you'll be required to list
twenty-five (25) "requested" calls...as there is a chance that the ones
you have requested are currently in use by licensed hams, or they have
not passed the 2 year grace period after expiration.

If you keep the callsign originally issued to you by the FCC, or ask
for (and receive) a new "sequential callsign", you won't have to pay for renewal, as sequential callsigns are "free". If you go through a license renewal service, such as the W5YI renewal on the QRZ website, you will
have to pay a processing fee, whether you have a vanity callsign or not.

However, members of the American Radio Relay League (ARRL), who
either keep their original callsign that was issued by the FCC, or a
newly issued sequential (non-vanity) callsign, can have their license
renewed FREE OF CHARGE at the appropriate time, from an ARRL/VEC VE Test Session. This also applies for a license modification (change of address, etc.).

(CONTINUED NEXT MESSAGE)


---
þ Synchronet þ The Thunderbolt BBS - wx1der.dyndns.org
* Origin: Freeway BBS - freeway.apana.org.au (432:1/101)

Sequential Versus Vanity Callsigns
==================================

Callsigns are normally issued in a sequential callsign system by
the FCC, for each license class. Once issued a callsign, you can
choose to keep it...or apply for a vanity callsign, after paying the appropriate fee, and submitting the required forms.

NOTE: Effective in summer 2021, there'll be a $35 fee for each Vanity
Callsign applied for. So if you apply for, pay for, and get a vanity callsign...then decide you don't like it, whether you apply for another
vanity callsign, or change to a sequential callsign, it'll still cost
you $35 each time you do it.

When applying for a vanity callsign, you'll be required to list
twenty-five (25) "requested" calls...as there is a chance that the ones
you have requested are currently in use by licensed hams, or they have
not passed the 2 year grace period after expiration.

U.S. amateur radio callsigns are grouped by license class, starting
with an A, K, N, or W...in the format of 1 or 2 letters, followed by
a digit from 0 through 9...depending on the callsign district they
were living in when they first got their license...followed by 1, 2,
or 3 letters.

Callsigns from Alaska begin with KL7, callsigns from Hawaii begin
with KH6, callsigns from Puerto Rico begin with KP4, and callsigns from
the U.S. Virgin Islands begin with KP2. If the amateur radio licensee
from these areas is an Amateur Extra Class licensee, the first letter
is likely an "A" instead of a "K".

Callsigns for other U.S. territories may be a bit different per the
license classes, noted below.

Minimum License Class: Callsign Group: Callsign Examples:

Novice 2 by 3 WA1BCD, KE2FGH
Technician or General 1 by 3 K5IJK, N3LMN, W5OPQ
Advanced 2 by 2 KA6RS, KK7TU
Amateur Extra 1 by 2 or 2 by 1 K8VW, N9WX, W0YZ

Since some of the sequential callsign groups have had all of the
regular callsigns issued, the issued sequential calls fall to the
lower license class. With a vanity callsign, you can apply for a
callsign in this group, if you're of the appropriate license class.
Callsigns that have been expired more than 2 years are returned to
the "unused callsign pool", and they can be requested as a vanity
callsign.

The higher amateur radio license that you have, the more choices you
have for a vanity callsign (i.e. Amateur Extra Class licensees can pick
from any group...while General Class licensees are limited to either
the 2 by 3 or 1 by 3 callsign group).

Amateur Extra Calls usually begin with an A, but can also begin with
either a K, an N, or a W. Advanced callsigns usually begin with a K,
but they can also begin with an N or a W. Technician or General callsigns usually begin with an K, N, or a W...and Novice callsigns usually begin
with either a K or a W.

However, a callsign is NOT ALWAYS indicative of a ham radio operators
actual license class. My first callsign, N5VLZ, issued in August, 1991,
was one of the last "1 by 3" callsigns issued for Arkansas. I held that
for 18 years, when I changed to the AE5WX callsign in June, 2009. Then,
in December, 2012, I changed to the WX1DER callsign...which reflects the
domain of my personal homepage, and of the BBS. And in 2019, I changed
to the WX4QZ callsign, changing the emphasis from weather to railroad
crossing safety. Besides, I know several Amateur Extra Class ham radio operators who still have their Novice class callsign format.

If you are already a licensed ham radio operator, and one of your
family members, who was also a ham radio operator (parent, grandparent, brother, sister, aunt, uncle, etc.), dies (becomes a Silent Key), you
may provide proof of their death (such as a death certificate) to the
FCC, along with a vanity callsign application, and request that callsign anytime within 2 years after that ham radio operators death. After that
2 year period, anyone can apply for it.

You must hold the appropriate license class to request that vanity
callsign. In other words, if the callsign of a deceased relative was
from the Amateur Extra Class group, you will have to become an Amateur
Extra Class licensee in order to request it.

Note that once you receive your new callsign...either from the
sequential or vanity callsign system...your old callsign is no
longer valid. However, as long as your license is not expired, you
keep the privileges you had before, but you're now using the new
callsign.

A list of the latest callsigns issued can be found in the ham
radio bulletins door on The Thunderbolt BBS. The list is obtained
from HamData.Com -- which gets its data from the FCC database. Note
that during a government shutdown, this data will NOT be updated,
since the FCC is closed.
--- SBBSecho 3.14-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (432:1/112)

(CONTINUED FROM PREVIOUS MESSAGE)

After The License Exam
======================

When you're done with the exam, return the test booklet, and the answer
sheet to the VE Team. They will grade it IMMEDIATELY (or as soon as is possible), and tell you whether you have passed or failed the test...
although they can NOT tell you what to study the next time, if you failed;
nor they can they tell you which questions you missed. Once your test
booklet and answer sheet have been turned into the VE Team, you may NOT
have them back.

As noted above, THERE IS NO DISGRACE IN FAILING an exam. If the VE Team
has the time and resources, and you're willing to pay an additional test
fee, they will let you retest, but with a different set of questions. Not
every ham radio operator has passed their license exam on the first try...
and some have taken nearly a dozen tries to pass an exam element.

If you pass the exam, and you do not yet have a callsign or a license; depending on processing time, your new callsign and/or license class
should be available on the Internet at the QRZ Ham Radio website at http://www.qrz.com in about 10 to 14 days...but sometimes, it may take a
bit longer...or it may be a bit sooner. However, during a Government
Shutdown, it will be delayed until the governement (and FCC) reopen...and
there likely will be a huge backlog of data to be processed...so, your
patience in this regard is appreciated.

Some VE Teams will scan in all the exam session documents, and put them
into a PDF file, and upload them to a private URL (hidden from the public),
to the VEC. If sent in on a weekend, it'll be processed the first business
day (usually a Monday, unless that day's a holiday). By the end of that
day, or by late the next day, the callsign/license will be in the FCC
database.

Once the callsign is there, you can begin operating. Look for the link entitled "FCC Reports"...and look for your name (last name first).
Archived entries are available, in case you can't access the Internet for
a period of time after you pass the test.

You can also go to the HamData website, http://www.hamdata.com to check
for new callsigns. Look under the link "Latest FCC Information".

The FCC no longer mails out a "paper copy" of ones amateur radio license. Instead, about 1 to 2 weeks after the exam session, the licensee will be notified via email that their license is available via the FCC ULS...and
they are provided logon credentials (usually the FRN and a temporary
password, which should be changed after initial logon). As noted, as of
April 19, 2022...examinees will have to pay a $35 fee for a new, renewed,
or upgraded ham radio license, or a callsign change (sequential or vanity), whether for individual or a club.

Once logged on, they can print an "Official Copy" of their license,
plus a "Reference Copy" to take to a future license exam session, should
they decide to upgrade their license. The FCC no longer mails out paper
copies of the licenses.

Once the copy of your new license is in hand, you may DESTROY the old license, and the applicable CSCE for the new one, unless you'd like to
keep the CSCE as a novelty. Be sure to SIGN the new license before you
make a copy of it, and/or laminate it; as the license is NOT valid without
your signature.

If you have not seen your callsign or upgrade in the FCC ULS 2 weeks
after you took the test, you should call either the exam session liaison,
or the VEC. In the case of an ARRL/VEC test session, they can be reached
from 7am to 4pm U.S. Central Time, Monday through Friday (except holidays),
at (860) 594-0300 -- this is a long distance call. However, the FCC is NOT available during a Government Shutdown.

Be sure to keep your U.S. Mailing Address CURRENT...as your license may
be SUSPENDED/REVOKED by the FCC, if mail they send to you is returned as undeliverable.

If you have a Certificate Of Successful Completion Of Examination
(CSCE), with a current license and callsign...that shows you've upgraded
to a higher license class, you may begin using your new license class privileges IMMEDIATELY...with the special identifiers, as follows:

UPGRADING TO: VOICE IDENTIFIER: DIGITAL IDENTIFIER:

Technician Temporary KT /KT

NOTE: This ONLY applies if upgrading from the "old Novice" license;
otherwise, no identifier is required...since Technician is the entry
class license...and you would NOT have a callsign to start with. The
digital identifier is for either Morse Code, or on a digital mode,
such as packet, PSK31, etc. -- the phone identifier is for voice.

General Temporary AG /AG

Amateur Extra Temporary AE /AE

The use of these special ID's follow your callsign on the new bands
for which your CSCE shows that you've upgraded to. If you previously
had privileges on a certain band without the CSCE (for instance, you
upgraded from Technician to General), you're not required to use the
ID on frequencies above 50 Megahertz. However, using the Technician to
General upgrade example, if you want to use the frequencies for the
General Class licensee, you are REQUIRED to use the new identifier.

If you upgrade to the Extra Class license BEFORE your General Class
paper license copy is in hand, or in the FCC database, you keep your
Technician Class license, and the CSCE's for the General and Extra
Class upgrade, as proof of your upgrades. Again, using the upgrade to
Extra Class as an example, you use the special identifier for it,
instead of the General Class license identifier.

Once your new license grant appears in the FCC ULS database, or on
the QRZ or Hamdata websites noted above), you're no longer required to
use the special identifier. This usually takes 1 to 2 weeks after the
day you passed the exam. Failure to use the identifier before your
license upgrade appears in the FCC database would make it appear that
you are operating on amateur radio bands outside your privileges, and
you could get a Notice Of Violation from the FCC if that occurs.

(CONTINUED NEXT MESSAGE)
--- SBBSecho 3.15-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (432:1/112)

(CONTINUED FROM PREVIOUS MESSAGE)

After The License Exam
======================

When you're done with the exam, return the test booklet, and the answer
sheet to the VE Team. They will grade it IMMEDIATELY (or as soon as is possible), and tell you whether you have passed or failed the test...
although they can NOT tell you what to study the next time, if you failed;
nor they can they tell you which questions you missed. Once your test
booklet and answer sheet have been turned into the VE Team, you may NOT
have them back.

As noted above, THERE IS NO DISGRACE IN FAILING an exam. If the VE Team
has the time and resources, and you're willing to pay an additional test
fee, they will let you retest, but with a different set of questions. Not
every ham radio operator has passed their license exam on the first try...
and some have taken nearly a dozen tries to pass an exam element.

If you pass the exam, and you do not yet have a callsign or a license; depending on processing time, your new callsign and/or license class
should be available on the Internet at the QRZ Ham Radio website at http://www.qrz.com in about 10 to 14 days...but sometimes, it may take a
bit longer...or it may be a bit sooner. However, during a Government
Shutdown, it will be delayed until the governement (and FCC) reopen...and
there likely will be a huge backlog of data to be processed...so, your
patience in this regard is appreciated.

Some VE Teams will scan in all the exam session documents, and put them
into a PDF file, and upload them to a private URL (hidden from the public),
to the VEC. If sent in on a weekend, it'll be processed the first business
day (usually a Monday, unless that day's a holiday). By the end of that
day, or by late the next day, the callsign/license will be in the FCC
database.

Once the callsign is there, you can begin operating. Look for the link entitled "FCC Reports"...and look for your name (last name first).
Archived entries are available, in case you can't access the Internet for
a period of time after you pass the test.

You can also go to the HamData website, http://www.hamdata.com to check
for new callsigns. Look under the link "Latest FCC Information".

The FCC no longer mails out a "paper copy" of ones amateur radio license. Instead, about 1 to 2 weeks after the exam session, the licensee will be notified via email that their license is available via the FCC ULS...and
they are provided logon credentials (usually the FRN and a temporary
password, which should be changed after initial logon). As noted, as of
April 19, 2022...examinees will have to pay a $35 fee for a new, renewed,
or upgraded ham radio license, or a callsign change (sequential or vanity), whether for individual or a club.

Once logged on, they can print an "Official Copy" of their license,
plus a "Reference Copy" to take to a future license exam session, should
they decide to upgrade their license. The FCC no longer mails out paper
copies of the licenses.

Once the copy of your new license is in hand, you may DESTROY the old license, and the applicable CSCE for the new one, unless you'd like to
keep the CSCE as a novelty. Be sure to SIGN the new license before you
make a copy of it, and/or laminate it; as the license is NOT valid without
your signature.

If you have not seen your callsign or upgrade in the FCC ULS 2 weeks
after you took the test, you should call either the exam session liaison,
or the VEC. In the case of an ARRL/VEC test session, they can be reached
from 7am to 4pm U.S. Central Time, Monday through Friday (except holidays),
at (860) 594-0300 -- this is a long distance call. However, the FCC is NOT available during a Government Shutdown.

Be sure to keep your U.S. Mailing Address CURRENT...as your license may
be SUSPENDED/REVOKED by the FCC, if mail they send to you is returned as undeliverable.

If you have a Certificate Of Successful Completion Of Examination
(CSCE), with a current license and callsign...that shows you've upgraded
to a higher license class, you may begin using your new license class privileges IMMEDIATELY...with the special identifiers, as follows:

UPGRADING TO: VOICE IDENTIFIER: DIGITAL IDENTIFIER:

Technician Temporary KT /KT

NOTE: This ONLY applies if upgrading from the "old Novice" license;
otherwise, no identifier is required...since Technician is the entry
class license...and you would NOT have a callsign to start with. The
digital identifier is for either Morse Code, or on a digital mode,
such as packet, PSK31, etc. -- the phone identifier is for voice.

General Temporary AG /AG

Amateur Extra Temporary AE /AE

The use of these special ID's follow your callsign on the new bands
for which your CSCE shows that you've upgraded to. If you previously
had privileges on a certain band without the CSCE (for instance, you
upgraded from Technician to General), you're not required to use the
ID on frequencies above 50 Megahertz. However, using the Technician to
General upgrade example, if you want to use the frequencies for the
General Class licensee, you are REQUIRED to use the new identifier.

If you upgrade to the Extra Class license BEFORE your General Class
paper license copy is in hand, or in the FCC database, you keep your
Technician Class license, and the CSCE's for the General and Extra
Class upgrade, as proof of your upgrades. Again, using the upgrade to
Extra Class as an example, you use the special identifier for it,
instead of the General Class license identifier.

Once your new license grant appears in the FCC ULS database, or on
the QRZ or Hamdata websites noted above), you're no longer required to
use the special identifier. This usually takes 1 to 2 weeks after the
day you passed the exam. Failure to use the identifier before your
license upgrade appears in the FCC database would make it appear that
you are operating on amateur radio bands outside your privileges, and
you could get a Notice Of Violation from the FCC if that occurs.

(CONTINUED NEXT MESSAGE)
--- SBBSecho 3.15-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (432:1/112)

(CONTINUED FROM PREVIOUS MESSAGE)

If you have a Certificate Of Successful Completion Of Examination
(CSCE), with a current license and callsign...that shows you've upgraded
to a higher license class, you may begin using your new license class privileges IMMEDIATELY...with the special identifiers, as follows:

UPGRADING TO: VOICE IDENTIFIER: DIGITAL IDENTIFIER:

Technician Temporary KT /KT

NOTE: This ONLY applies if upgrading from the "old Novice" license;
otherwise, no identifier is required...since Technician is the entry
class license...and you would NOT have a callsign to start with. The
digital identifier is for either Morse Code, or on a digital mode,
such as packet, PSK31, etc. -- the phone identifier is for voice.

General Temporary AG /AG

Amateur Extra Temporary AE /AE

The use of these special ID's follow your callsign on the new bands
for which your CSCE shows that you've upgraded to. If you previously
had privileges on a certain band without the CSCE (for instance, you
upgraded from Technician to General), you're not required to use the
ID on frequencies above 50 Megahertz. However, using the Technician to
General upgrade example, if you want to use the frequencies for the
General Class licensee, you are REQUIRED to use the new identifier.

If you upgrade to the Extra Class license BEFORE your General Class
paper license copy is in hand, or in the FCC database, you keep your
Technician Class license, and the CSCE's for the General and Extra
Class upgrade, as proof of your upgrades. Again, using the upgrade to
Extra Class as an example, you use the special identifier for it,
instead of the General Class license identifier.

Once your new license grant appears in the FCC ULS database, or on
the QRZ website noted above), you're no longer required to use the
special identifier. This usually takes 1 to 2 weeks after the day you
passed the exam. Failure to use the identifier before your license
upgrade appears in the FCC database would make it appear that you are
operating on amateur radio bands outside your privileges, and you
could get a Notice Of Violation from the FCC if that occurs.

Government Shutdowns And Licenses
=================================

Unfortunately, at times, a budgetary impasse within Congress, or if
the President does not sign a budget into law (either via a Continuing Resolution (CR)), or a full budget prior to the government fiscal year
that starts October 1, portions of the U.S. government "shut down". Any
work considered essential to the protection of life and property will
continue, but "non-essential" departments are shuttered, and their
workers are sent home. Those who still work (such as with the TSA at
airports, and the U.S. Coast Guard) do so without pay. Except for the government contractors, all will receive back pay when the government
shutdown ends, and the agencies reopen.

One of the agencies affected by the shutdown is the FCC. During this
time, they will NOT process any applications for new, renewal, or
upgraded amateur radio licenses, callsign changes, etc. The VE Teams
can send the results to their particular VEC, but the VEC can't key
the data to the FCC until the shutdown ends.

Now, if one's license enters the 90 day window prior to expiration,
they can file the renewal, and continue to operate, even if their
license expires during the shutdown. However, if they wait until the
shutdown ends to file the renewal, it'll have to get to the FCC within
two (2) days, or the license will be expired. Once a license expires,
the amateur radio operator is QRT (off the air). And, as noted above,
if the license lapses (expires more than 2 years), they have to start
all over, by passing the Technician Class exam, and getting a new ham
radio callsign.

(CONTINUED NEXT MESSAGE)
--- SBBSecho 3.15-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (432:1/112)

(CONTINUED FROM PREVIOUS MESSAGE)

If you have a Certificate Of Successful Completion Of Examination
(CSCE), with a current license and callsign...that shows you've upgraded
to a higher license class, you may begin using your new license class privileges IMMEDIATELY...with the special identifiers, as follows:

UPGRADING TO: VOICE IDENTIFIER: DIGITAL IDENTIFIER:

Technician Temporary KT /KT

NOTE: This ONLY applies if upgrading from the "old Novice" license;
otherwise, no identifier is required...since Technician is the entry
class license...and you would NOT have a callsign to start with. The
digital identifier is for either Morse Code, or on a digital mode,
such as packet, PSK31, etc. -- the phone identifier is for voice.

General Temporary AG /AG

Amateur Extra Temporary AE /AE

The use of these special ID's follow your callsign on the new bands
for which your CSCE shows that you've upgraded to. If you previously
had privileges on a certain band without the CSCE (for instance, you
upgraded from Technician to General), you're not required to use the
ID on frequencies above 50 Megahertz. However, using the Technician to
General upgrade example, if you want to use the frequencies for the
General Class licensee, you are REQUIRED to use the new identifier.

If you upgrade to the Extra Class license BEFORE your General Class
paper license copy is in hand, or in the FCC database, you keep your
Technician Class license, and the CSCE's for the General and Extra
Class upgrade, as proof of your upgrades. Again, using the upgrade to
Extra Class as an example, you use the special identifier for it,
instead of the General Class license identifier.

Once your new license grant appears in the FCC ULS database, or on
the QRZ website noted above), you're no longer required to use the
special identifier. This usually takes 1 to 2 weeks after the day you
passed the exam. Failure to use the identifier before your license
upgrade appears in the FCC database would make it appear that you are
operating on amateur radio bands outside your privileges, and you
could get a Notice Of Violation from the FCC if that occurs.

Government Shutdowns And Licenses
=================================

Unfortunately, at times, a budgetary impasse within Congress, or if
the President does not sign a budget into law (either via a Continuing Resolution (CR)), or a full budget prior to the government fiscal year
that starts October 1, portions of the U.S. government "shut down". Any
work considered essential to the protection of life and property will
continue, but "non-essential" departments are shuttered, and their
workers are sent home. Those who still work (such as with the TSA at
airports, and the U.S. Coast Guard) do so without pay. Except for the government contractors, all will receive back pay when the government
shutdown ends, and the agencies reopen.

One of the agencies affected by the shutdown is the FCC. During this
time, they will NOT process any applications for new, renewal, or
upgraded amateur radio licenses, callsign changes, etc. The VE Teams
can send the results to their particular VEC, but the VEC can't key
the data to the FCC until the shutdown ends.

Now, if one's license enters the 90 day window prior to expiration,
they can file the renewal, and continue to operate, even if their
license expires during the shutdown. However, if they wait until the
shutdown ends to file the renewal, it'll have to get to the FCC within
two (2) days, or the license will be expired. Once a license expires,
the amateur radio operator is QRT (off the air). And, as noted above,
if the license lapses (expires more than 2 years), they have to start
all over, by passing the Technician Class exam, and getting a new ham
radio callsign.

(CONTINUED NEXT MESSAGE)
--- SBBSecho 3.14-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (432:1/112)